Rishabh Digital Multimeter DC Current Range 10μA to 10A 615

Product Description

• Direct and alternating voltages from 100μV ... 1000V

• Direct and alternating currents from 10μA ... 10.00A

• Resistance from 1Ω... 60.00MΩ.

• Capacitance from 1pF ... 40.00 mF with zero correction

• Frequencies from 10.00Hz ... 10MHz

• Diode measurement and continuity testing

• Hold measurement

• Relative measurement

• Duty cycle (%) measurement

• Temperature measurement with K type Thermocouple

• Peak value measurement

• Dual Display

• The dual display included a main display and a sub display

• Main display always display current measurement value where as sub display shows some special measurements like maximum/ minimum value, reference value for relative value measurement

• Also dual display is used to display at the same time Voltage/ Current with Frequency, Frequency with Duty cycle etc.

• Peak Hold

• Minimum and maximum Peak values are hold in VAC, mAAC, AAC

• MIN/MAX Function

• By pressing min/max button instrument will start recording minimum and maximum readings

• All functions can measure MIN/MAX except Hz/Duty functions

• Temperature Measurement

• Multimeters measure temperature with “ K ” type Thermocouple (Ni Cr-Ni) sensor in the range from 0DegC to +1300 DegC

• Indication Of Negative Values On The Analog Scale

• When measuring DC quantities negative values are shown on the analog scale so that variations of the measured value can be observed at the Zero point

• Analog Scale

• Analog scale that updates at the rate 28 times/sec to observe

• Protection From Dust And Water

• Instrument: IP 52

• For terminals: IP20 as per IEC60529

• Applicable International Safety Standard

• 1000 V CAT III/600V CAT IV as per International Safety standard

• IEC 61010-1- 2010 and IEC 61557

• Hold

• By pressing the “HOLD” key, the currently displayed measurement value can be held and “HOLD” is simultaneously displayed

• Relative Measurement(REL)

• By pressing and holding PEAK and then pressing AUTO/MAN key, the zero correction is made and relative Value is measured

• It is not active in Hz/Duty functions

• Automatic Terminal Blocking System(Abs)

• The automatic terminal blocking system prevents incorrect connection of test lead and incorrect selection of measurement quantity, which provide safety to the user

• Auto And Manual Ranging Modes

• In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In manual ranging mode range is user selectable using AUTO/MAN Key

• Note: For AAC, ADC, Temperature ,Continuity ,Diode and Duty cycle measuring range is manual

• No AUTO range selection is possible

• Hz/Duty

• By pressing “Hz/%” key in Vac mode the instrument can measure frequency (Hz) and duty cycle (%) of the AC Voltage by pressing

• Diode And Continuity Testing

• This provides for the testing of the polarity of diodes, as well as inspection for short -circuits and circuit interruptions

• In addition to the display, resistance of less than 30 Ω(approx.) Are Indicated with an acoustic signal

• Backlit

• Large white LED backlit to work in poorly light area

• ContinuousON mode

• In this mode, AUTO POWER OFF is disabled

Product Specification

Brand	Rishabh
Product Type	Digital Multimeter
Product Model	615
Display	4 digit
Counts	6600
Relative Humidity	45 % - 75 %
Sensing	Average
Frequency Range (Hz)	0.01 Hz - 10 MHz
Operating Temperature	-10 C - 50 C
Dc Voltage Range	100µV-1000V
Dc Current Range (amp)	10µA-10A
Storage Temperature	-25 C - 70 C
Capacitance Range (F)	1pF - 40mF
Altitude	2000 m
Power Input	AAA (1.5V x 2)
Dimensions	86x188x53 mm(with Holster) 79x174x38 mm(without Holster)
Weight (g)	350 g
Warranty	As Per Manufacturer Terms And Conditions